Nanlite's vela spotlights are shipping in the US, and the four fixtures are priced lower than their own list prices: the 150W vela 150b is $167 against $209, the full-color 150c is $199 against $249, the 300W 300b is $239 against $299, and the 300c is $279 against $349. That is 20% off each one, running as part of the Nanlite US Black Friday sale the store dates Nov 20 to Dec 3.
The series itself is new. Nanlite showed the four lights at Inter BEE 2026 in Japan after bringing prototypes to IBC, and Newsshooter's first look, updated Nov 20, reports all four are now shipping. What is worth reading closely is not the launch, which is a fortnight of trade-show copy, but the price-to-output ratio Nanlite is claiming and how it gets there.
Four fixtures, two power classes
The 150b and 150c are 150W units that weigh 900 g (1.98 lb) and measure 7 cm (2.76 in) front to back. The 300b and 300c are 300W units at 2.23 kg (4.92 lb) and 12 cm (4.72 in). All four take Bowens-mount modifiers and carry a built-in power supply, which is why the 150W bodies have a single AC cable rather than a brick.
The b versions are bi-color, 2700K–7500K. The c versions use what Nanlite calls the Nebula C4 light engine for 2400K–12000K with plus or minus 150 green/magenta shift, and the 150c is rated CRI 95 and TLCI 94. Nanlite's output figures, all at 5600K and 1 m, are 52,600 lux for the 150b with its included 21°–40° Fresnel, 44,200 lux for the 150c, 66,600 lux for the 300b with its included 40° reflector, and 52,200 lux for the 300c. Nanlite also claims the 300W bodies are 40% smaller and 30% lighter than traditional spotlights; no reference fixture is named for that comparison, so it is a claim rather than a measurement.
Control is on-board or through the NANLINK app.
Running them away from a wall outlet
The 150b and 150c accept USB-C PD 3.1 from an adapter or power bank, the BT-BG-14.4V73 battery grip, or a 14.4–14.8V V-mount through the CB-DT-PD D-Tap to USB-C PD cable. Nanlite's own limiter matters more than the accessory list: on a 99Wh battery the fixture caps output at 65%, and the grip is rated for roughly 45 minutes at that 65% ceiling. A 150W light that halves itself to run on a pocket battery is a different tool from one that runs at full power, and the 300W bodies have no battery path at all.
The accessories are priced separately from the fixtures: $89.90 for the grip, $19.90 for the FL-11CP Fresnel, $89.00 for the PJ-BMCP-36 36° projection attachment, $34.90 and $49.90 for the 30 cm and 40 cm octagonal softboxes.
Quick specs, for the four fixtures as listed by Nanlite US:
- Price: $167 (150b), $199 (150c), $239 (300b), $279 (300c) during the Nov 20–Dec 3 sale; list $209, $249, $299, $349
- Power: 150W (150b, 150c), 300W (300b, 300c)
- CCT: 2700K–7500K (b), 2400K–12000K ±150 G/M (c)
- Mount: Bowens
- Weight: 900 g / 1.98 lb (150b, 150c), 2.23 kg / 4.92 lb (300b, 300c)
- Depth: 7 cm / 2.76 in (150), 12 cm / 4.72 in (300)
- Availability: in stock on Nanlite's US store
The thing I would want measured is fan noise, not lux. A 150W engine, a built-in supply and 900 g of body means the heatsink and fan are doing real work in a small volume, and a photometric figure taken at 1 m in a quiet room says nothing about a fan cycling next to a microphone at 50 cm. I have not handled these lights, so I cannot tell you whether the cooling is audible; that measurement is the one that decides whether the 150b belongs on a documentary kit or only on a stand.
At $167 the 150b is the cheapest way into a Bowens-mount 150W fixture with a battery path that does not need a separate power station, and the 300b at $239 is the same argument one stop up. Both prices end Dec 3.
